Climate Control Unit Removal/Installation

Remove the instrument panel (A) (see INSTRUMENT PANEL REMOVAL/INSTALLATION ).

Fig 1: Identifying Instrument Panel And Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the connector (B) and the climate control unit.
Remove the self-tapping screws from the climate control unit.

Fig 2: Identifying Climate Control Unit With Self-Tapping Screws
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the ring cover (A), and detach the climate control unit (B) from the instrument panel (C).

Fig 3: Identifying Ring Cover, Climate Control Unit And Instrument Panel
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the climate control unit in the reverse order of removal. After installation, operate the various functions to see whether it works properly.
Run the self-diagnostic function to confirm that there are no problems in the system (see HOW TO USE THE SELF-DIAGNOSTIC FUNCTION WITHOUT THE HDS ).