LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2014 >> Fit >> Repair and Diagnosis >> External Pages >> Different car >> Section 139 (Audio Visual System - Symptom Troubleshooting) >> Connector For Inputs And Outputs >> Audio-Navigation Unit Connector for Inputs and Outputs
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Audio-Navigation Unit Connector for Inputs and Outputs

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2020 Honda Fit, 2019 Honda Fit, 2018 Honda Fit, 2017 Honda Fit, and 2016 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.
Connector Index
Audio-Navigation Unit Connector A (24P)
Audio-Navigation Unit Connector B (20P)
Audio-Navigation Unit Connector C (24P)
Audio-Navigation Unit Connector D (12P)
Audio-Navigation Unit Connector E (3P)
Audio-Navigation Unit Connector F (5P)
Audio-Navigation Unit Connector G (5P)
Audio-Navigation Unit Connector H (20P)
Audio-Navigation Unit Connector J (2P)

AUDIO-NAVIGATION UNIT CONNECTOR A (24P) 

GHH79027Courtesy of HONDA, U.S.A., INC.
Cavity Terminal Name Description Voltage (about) Symptom
A1 GND Ground for audio-navigation unit (G404) Vehicle in ACCESSORY mode: Less than 0.2 V If open: Audio-navigation unit screen goes black (backlight still operates). Audio system does not work.

If short to ground: No effect on system.

A2 Not used ------ ------ ------
A3 +B BACKUP MAIN Continuous power source Battery voltage If open: Audio-navigation unit screen goes black. Audio system does not work.

If short to ground: Blows the No. B21 (15 A) fuse in the under-hood fuse/relay box.

A4 Not used ------ ------ ------
A5 RL SPKR+ Outputs sound signal for left rear speaker ------ ------
A6 RL SPKR- Outputs sound signal for left rear speaker ------ ------
A7 Not used ------ ------ ------
A8 Not used ------ ------ ------
A9 RR SPKR+ Outputs sound signal for right rear speaker ------ ------
A10 RR SPKR- Outputs sound signal for right rear speaker ------ ------
A11 REMOTE SW GND Audio remote switch ground Vehicle in ACCESSORY mode: Less than 0.2 V ------
A12 Not used ------ ------ ------
A13 K LINE Detects scan tool signal (serial data) ------ ------
A14 Not used ------ ------ ------
A15 FL SPKR+ Outputs sound signal for left front speakers ------ ------
A16 FL SPKR- Outputs sound signal for left front speakers ------ ------
A17 Not used ------ ------ ------
A18 Not used ------ ------ ------
A19 FR SPKR+ Outputs sound signal for right front speakers ------ ------
A20 FR SPKR- Outputs sound signal for right front speakers ------ ------
A21 Not used ------ ------ ------
A22 AUDIO REMOTE SW Detects control signal from audio remote switch Vehicle in ACCESSORY mode: 2.5 V - 2.9 V ------
A23 DISPLAY SW Detects control signal from audio remote switch Vehicle in ACCESSORY mode: 2.5 V - 2.9 V ------
A24 ACC Power source for accessories Vehicle in ACCESSORY mode: Battery voltage If open: Audio-navigation unit screen goes black. Audio system does not work.

If short to ground: Blows the No. C37 (7.5 A) fuse in the under-dash fuse/relay box.

AUDIO-NAVIGATION UNIT CONNECTOR B (20P) 

GHH79028Courtesy of HONDA, U.S.A., INC.
Cavity Terminal Name Description Voltage (about) Symptom
B1 Not used ------ ------ ------
B2 Not used ------ ------ ------
B3 B-CAN_L Communication signal ------ If open/short to ground: System Links B-CAN icon shows red.
B4 Not used ------ ------ ------
B5 Not used ------ ------ ------
B6 Not used ------ ------ ------
B7 Not used ------ ------ ------
B8 Not used ------ ------ ------
B9 Not used ------ ------ ------
B10 Not used ------ ------ ------
B11 PARKING BRAKE SW Detects parking brake switch on signal Vehicle in ACCESSORY mode, parking brake switch is applied: Less than 0.2 V

Vehicle in ACCESSORY mode, parking brake switch is not applied: 3.3 V

------
B12 HFT/NAVI REMOTE SW Detects control signal from HFL switch Vehicle in ACCESSORY mode: 2.5 V - 2.9 V ------
B13 B-CAN_H Communication signal ------ If open/short to ground: System Links B-CAN icon shows red.
B14 Not used ------ ------ ------
B15 Not used ------ ------ ------
B16 Not used ------ ------ ------
B17 Not used ------ ------ ------
B18 Not used ------ ------ ------
B19 Not used ------ ------ ------
B20 Not used ------ ------ ------

AUDIO-NAVIGATION UNIT CONNECTOR C (24P) 

GHH79029Courtesy of HONDA, U.S.A., INC.
Cavity Terminal Name Description Voltage (about) Symptom
C1 F-CAN_L Communication signal ------ If open/short to ground: System Links F-CAN icon shows red.
C2 SH CAMERA Shield for terminals No. 3, No. 4, No. 15, and No. 16 ------ ------
C3 CAMERA V GND Ground for video signal Vehicle in ACCESSORY mode: Less than 0.2 V ------
C4 RC GND Ground for rear view camera for power source Vehicle in ACCESSORY mode: Less than 0.2 V ------
C5 CAMERA BIT0 Mode select signal for rearview camera 0 V or 5 V - 8 V (depends on rearview mode) ------
C6 LANEWATCH SW LaneWatch on/off signal from LaneWatch switch Vehicle in ACCESSORY mode, LaneWatch switch is pressed: Less than 0.2 V

Vehicle in ACCESSORY mode, LaneWatch switch is released: 3.3 V

------
C7 BACK LT Detects reverse signal of select lever from reverse relay circuit Vehicle in ON mode, transmission is shifted to R position/mode: Battery voltage

Vehicle in ON mode, transmission is shifted to any position/mode other than R position/mode: Less than 0.2 V

------
C8 LWC CAM VGND Ground for LaneWatch camera ------ ------
C9 SH LWC CAM Shield for terminals No. 8, No. 20, No. 21, No. 22, and No. 23 ------ ------
C10 Not used ------ ------ ------
C11 Not used ------ ------ ------
C12 Not used ------ ------ ------
C13 F-CAN_H Communication signal ------ If open/short to ground: System Links F-CAN icon shows red.
C14 VSP Detects vehicle speed pulse from PCM Vehicle in ACCESSORY mode: 5 V

Vehicle in ON mode: Pulses (depends on vehicle speed)

------
C15 CAMERA V Video signal for rearview camera ------ ------
C16 RC VCC Power source for rearview camera Vehicle in ACCESSORY mode: 8 V ------
C17 Not used ------ ------ ------
C18 CAMERA BIT1 Mode select signal for rearview camera 0 V or 5 V - 8 V (depends on rearview mode) ------
C19 CAMERA ADPT Detects connection for rearview camera Less than 0.2 V If open: System Links Rear Wide Camera icon shows red.
C20 LWC CAM VID Video signal for LaneWatch camera ------ ------
C21 LWC CAM VCC Power source for LaneWatch camera Vehicle in ACCESSORY mode: 8 V ------
C22 UNIT TO LWC Communication signal for LaneWatch camera ------ If open/short to ground: System Links LaneWatch icon shows red.
C23 LWC TO UNIT Communication signal for LaneWatch camera ------ If open/short to ground: System Links LaneWatch icon shows red.
C24 Not used ------ ------ ------

AUDIO-NAVIGATION UNIT CONNECTOR D (12P) 

GHH79030Courtesy of HONDA, U.S.A., INC.
Cavity Terminal Name Description Voltage (about) Symptom
D1 GA BUS- GA-Net bus communication signal ------ If open/short to ground: System Links XM icon shows red.
D2 SH GA BUS Shield for terminals No. 1 and No. 7 ------ ------
D3 GA AUDIO L- Inputs sound signal from XM receiver ------ ------
D4 GA AUDIO R- Inputs sound signal from XM receiver ------ ------
D5 SH GA AUDIO Shield for terminals No. 3, No. 4, No. 9, and No. 10 ------ ------
D6 GA GND GA-Net related units ground Vehicle in ACCESSORY mode: Less than 0.2 V If open: System Links XM icon shows red.
D7 GA BUS+ GA-Net bus communication signal ------ If open/short to ground: System Links XM icon shows red.
D8 GA SYS ON Output signal for GA-Net related units switching on/off Vehicle in ACCESSORY mode: Less than 0.2 V

Vehicle in OFF (LOCK) mode: 3.3 V - Battery voltage (depends on connected slave unit)

If open: System Links XM icon shows red.
D9 GA AUDIO L+ Inputs sound signal from XM receiver ------ ------
D10 GA AUDIO R+ Inputs sound signal from XM receiver ------ ------
D11 Not used ------ ------ ------
D12 GA+B Outputs power source for GA-Net related units Battery voltage If open/short to ground: System Links XM icon shows red.

AUDIO-NAVIGATION UNIT CONNECTOR E (3P) 

GHH79031Courtesy of HONDA, U.S.A., INC.
Cavity Terminal Name Description Voltage (about) Symptom
E1 SWD +B Power source for AM/FM antenna ------ ------
E2 AM/FM Inputs AM/FM signal ------ ------
E3 SH (AM/FM) Shield for terminal No. 2 ------ ------

AUDIO-NAVIGATION UNIT CONNECTOR F (5P) 

GHH79032Courtesy of HONDA, U.S.A., INC.
Cavity Terminal Name Description Voltage (about) Symptom
F1 USB1 GND Ground for communication signal ------ ------
F2 USB1 VBUS Outputs power source for USB port A ------ ------
F3 USB1 DATA+ Communication signal ------ ------
F4 USB1 DATA- Communication signal ------ ------
F5 USB1 SH Shield for terminals No. 1, No. 2, No. 3, and No. 4 ------ ------

AUDIO-NAVIGATION UNIT CONNECTOR G (5P) 

GHH79033Courtesy of HONDA, U.S.A., INC.
Cavity Terminal Name Description Voltage (about) Symptom
G1 USB2 GND Ground for communication signal ------ ------
G2 USB2 VBUS Outputs power source for USB port B ------ ------
G3 USB2 DATA+ Communication signal ------ ------
G4 USB2 DATA- Communication signal ------ ------
G5 USB2 SH Shield for terminals No. 1, No. 2, No. 3, and No. 4 ------ ------

AUDIO-NAVIGATION UNIT CONNECTOR H (20P) 

GHH79034Courtesy of HONDA, U.S.A., INC.
Cavity Terminal Name Description Voltage (about) Symptom
H1 T.M.D.S DATA2+ Inputs video/audio data signal ------ ------
H2 T.M.D.S DATA2 SHIELD Shield for terminals No. 1 and No. 3 ------ ------
H3 T.M.D.S DATA2- Inputs video/audio data signal ------ ------
H4 T.M.D.S DATA1+ Inputs video/audio data signal ------ ------
H5 T.M.D.S DATA1 SHIELD Shield for terminals No. 4 and No. 6 ------ ------
H6 T.M.D.S DATA1- Inputs video/audio data signal ------ ------
H7 T.M.D.S DATA0+ Inputs video/audio data signal ------ ------
H8 T.M.D.S DATA 0 SHIELD Shield for terminals No. 7 and No. 9 ------ ------
H9 T.M.D.S DATA0- Inputs video/audio data signal ------ ------
H10 T.M.D.S CLOCK+ TMDS synchronous signal ------ ------
H11 T.M.D.S CLOCK SHIELD Shield for terminals No. 10 and No. 12 ------ ------
H12 T.M.D.S CLOCK- TMDS synchronous signal ------ ------
H13 CEC HDMI control signal ------ ------
H14 UTILITY Not used ------ ------
H15 SCL I2C bus synchronous signal ------ ------
H16 SDA I2C bus communication signal ------ ------
H17 DDC, CEC GROUND Ground for HDMI control signal ------ ------
H18 +5V POWER 5 V power supply ------ ------
H19 HOT PLUG DETECT Detects connection signal ------ ------
H20 SHIELD Shield for all of terminals ------ ------

AUDIO-NAVIGATION UNIT CONNECTOR J (2P) 

GHH79035Courtesy of HONDA, U.S.A., INC.
Cavity Terminal Name Description Voltage (about) Symptom
J1 GPS ------ ------ If open/short to ground: System Links GPS antenna icon shows red.
J2 SH (GPS) ------ ------ If open: System Links GPS antenna icon shows red.