Forced Completing of In Line Diag
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2020 Honda Fit, 2019 Honda Fit, 2018 Honda Fit, 2017 Honda Fit, and 2016 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.
Follow the steps below to prevent the screen from showing up in the future:
1. While displaying the In Line Diag screen, press and hold the EJECT button, the POWER (
) button, and the HOME button until the Select Diagnosis Items menu screen is displayed
2. While displaying the Select Diagnosis Items menu screen, press and hold the HOME button until the In Line Diag setting screen is displayed.
3. Set the Inline Diag Setting to OK (complete). The system restarts and a normal start-up process occurs. The In Line Diag should not appear again.