LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2014 >> Fit >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Keyless/Power Door Locks/Security System) >> Security Hood Switch Test >> With Security
April 5, 2026: LEMON Manuals is launched! Read the announcement.

With Security

WARNING: This page is about a different car, the 2013 Honda Fit, 2012 Honda Fit, 2011 Honda Fit, 2010 Honda Fit, and 2009 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the hood.
  2. Remove the front grille cover (see FRONT GRILLE COVER REPLACEMENT ).
  3. Disconnect the 2P connector (A) from the hood switch (B).
    Fig 1: Identifying Hood Switch 2P Connector Terminals
    G05959973Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Check for continuity between the terminals.
    • There should be continuity between terminals No. 1 and No. 2 when the hood is opened (lever released).
    • There should be no continuity between terminals No. 1 and No. 2 when the hood is closed (lever pushed down).
  5. If the continuity is not as specified, replace the hood latch assembly (see HOOD LATCH REPLACEMENT ).
scientia non olet · About LEMON Manuals