LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2014 >> Fit >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Keyless/Power Door Locks/Security System) >> Symptom Troubleshooting >> Security Alarm System Will Not Arm >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Security Alarm System Will Not Arm: Notes

WARNING: This page is about a different car, the 2013 Honda Fit, 2012 Honda Fit, 2011 Honda Fit, 2010 Honda Fit, and 2009 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Before troubleshooting, check the B-CAN DTCs. If any DTC is indicated, refer to the B-CAN System Diagnosis Test Mode A, and troubleshoot the indicated DTCs first. (See TROUBLESHOOTING - B-CAN SYSTEM DIAGNOSIS TEST MODE A ).
  1. Turn the ignition switch to ON (II).
  2. Select SECURITY from the BODY ELECTRICAL menu, and enter the DATA LIST with the HDS.
  3. Check the ON/OFF information in the DATA LIST when each switch is operating.
    • TRUNK LID/TAILGATE SWITCH
    • SECURITY HOOD SWITCH
    • DRIVER'S DOOR LOCK KNOB SWITCH (UNLOCK)
    • FRONT PASSENGER'S DOOR LOCK KNOB SWITCH (UNLOCK)
    • LEFT REAR DOOR LOCK KNOB SWITCH (UNLOCK)
    • RIGHT REAR DOOR LOCK KNOB SWITCH (UNLOCK)
    • DRIVER'S DOOR SWITCH
    • FRONT PASSENGER'S DOOR SWITCH
    • LEFT REAR DOOR SWITCH
    • RIGHT REAR DOOR SWITCH
    • DRIVER'S DOOR KEY CYLINDER SWITCH (LOCK)
    • DRIVER'S DOOR KEY CYLINDER SWITCH (UNLOCK)

    Is each switch's information OK? 

    YES  - Intermittent failure, the system is OK at this time.

    NO  - Troubleshoot the indicated circuit: