LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2014 >> Insight Base >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Climate Control >> Air Mix Control Motor Replacement
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Air Mix Control Motor Replacement

  1. Remove the passenger's dashboard undercover (see PASSENGER'S DASHBOARD UNDERCOVER REMOVAL/INSTALLATION ) and the glove box (see GLOVE BOX REMOVAL/INSTALLATION ).
  2. Disconnect the 7P connector (A) from the air mix control motor (B). Remove the self-tapping screws and the air mix control motor from the heater unit.
    Fig 1: Identifying Air Mix Control Motor And 7P Connector
    G08094433Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. With the motor removed, make sure the door linkage moves smoothly and does not bind.
  4. Install the motor in the reverse order of removal. Make sure the pin on the motor is properly engaged with the linkage. After installation, make sure the motor runs smoothly.
scientia non olet · About LEMON Manuals