Back Power Window Motor Test

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2014 Honda Ridgeline, 2013 Honda Ridgeline, 2012 Honda Ridgeline, 2011 Honda Ridgeline, and 2010 Honda Ridgeline. However, it is still accessible from the selected car via links, so may be relevant.

Remove the rear panel trim (see REAR PANEL INSULATOR REPLACEMENT ).
Disconnect the 6P connector (A) from the back window motor.

Fig 1: Identifying Back Window Motor 6P Connector Terminals
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Test the motor by connecting battery power and ground according to the table. When the motor stops running, disconnect one lead immediately.

Fig 2: Terminal Continuity Reference Chart
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the motor does not run or fails to run smoothly, replace the back window middle glass regulator (see BACK WINDOW MIDDLE GLASS REGULATOR REPLACEMENT ).