Back Power Window Switch Test/Replacement
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2014 Honda Ridgeline, 2013 Honda Ridgeline, 2012 Honda Ridgeline, 2011 Honda Ridgeline, and 2010 Honda Ridgeline. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the driver's door panel (see FRONT DOOR PANEL REMOVAL/INSTALLATION ).
- Remove the three mounting screws, then remove the back power window switch (A) from the switch panel (B).
- Swap the back power window switch with another known-good switch and test. If the original back power window switch is faulty; replace it.
- Install the switch in the reverse order of removal.
- Reset the power window control unit (see RESETTING THE POWER WINDOW CONTROL UNIT ).