Audio Remote Switch Test

SRS components are located in this area. Review the SRS component locations (see COMPONENT LOCATION INDEX ), and the precautions and procedures (see PRECAUTIONS AND PROCEDURES ) before doing repairs or service.

1. Remove the audio remote switch:
   • With HandsFreeLink (see WITH HANDSFREELINK  )
   • Without HandsFreeLink (see WITHOUT HANDSFREELINK  )
     Fig 1: Identifying Audio Remote Switch Terminals

     Courtesy of AMERICAN HONDA MOTOR CO., INC.
2. Measure the resistance between terminals No. 1 and No. 8 in each switch position according to the table.

   Position	Resistance
   No button pressed	About 10 kΩ
   MODE	About 3.7 kΩ
   CH (+)	About 1.7 kΩ
   CH (-)	About 775 Ω
   ↑ (VOL UP)	About 357 Ω
   ↓ (VOL. DOWN)	About 100 Ω

3. If the resistance is not as specified, replace the audio remote switch:
   • With HandsFreeLink (see WITH HANDSFREELINK  )
   • Without HandsFreeLink (see WITHOUT HANDSFREELINK  )