PCV Valve Replacement

WARNING: This page is about a different car, the 2011 Honda Pilot, 2010 Honda Pilot, and 2009 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.

Remove the engine cover (see step 1 on IGNITION COIL REMOVAL/INSTALLATION ).
Remove the bolt (A).

Fig 1: Bolt, PCV Valve And O-Rings With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the PCV valve (B).
NOTE: Do not spill oil on the hot exhaust manifold.
Install the parts in the reverse order of removal.
NOTE:
- When installing a new PCV valve, make sure the O-rings (C) are in place.
- When installing a used PCV valve, use new O-rings.