Programming immobilizer-keyless control unit
WARNING: This page is about a different car, the 2011 Honda Pilot, 2010 Honda Pilot, and 2009 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.
- Have all registered keys and the PCM code.
- Connect the HDS to the data link connector.
- Turn the ignition switch to ON (II).
- Select IMMOBI from the SYSTEM SELECTION MENU, then select IMMOBILIZER SET UP.
- Select REPLACE IMM UNIT.
- Do the registration according to the instructions on the HDS screen.
- Check that the engine can be started with all registered keys and if the door locks operate using the immobilizer key transmitter.