Rearview Camera Inputs and Outputs For 6P Connector
WARNING: This page is about a different car, the 2011 Honda Pilot, 2010 Honda Pilot, and 2009 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.
TERMINAL VOLTAGE REFERENCE TABLE
| Terminal Number | Wire Color | Terminal Name | Description | Voltage (about) | Symptom | ||
|---|---|---|---|---|---|---|---|
| 1 | YEL | CAMERA ADPT (Adaptive camera) | Control signal for rearview camera | 0 V | If open: No change to rearview camera image. If short to ground: No change to rearview camera image. |
||
| 2 | GRY(1) | CAMERA SH (Camera shield) | Shield for terminals No. 1, 3, 4, 5, 6 | 0 V | If open: No rearview camera image. If short to ground: No change to rearview camera image. |
||
| 3 | BLK | CAMERA VIDEO (Video camera) | Video signal for rearview camera | 0.3 V | If open: No rearview camera image. If short to ground: When put into reverse, navigation screen goes black (display backlight still operative). |
||
| 4 | GRN | CAMERA GND (Ground camera) | Ground for camera signal | 0 V | If open: No change to rearview camera image. If short to ground: No change to rearview camera image. |
||
| 5 | RED | RC GND (Ground camera) | Power source for rearview camera | 0 V | If open: No change to rearview camera image. If short to ground: No change to rearview camera image. |
||
| 6 | WHT | CAMERA VCC (VCC supply) | Power source for rearview camera | 8V | If open: No rearview camera image. If short to ground: When put into reverse, navigation screen goes black (display backlight still operative). |
||
|
|||||||