Tailgate Outer Handle Switch Test/Replacement

Remove the tailgate lower trim panel (see TRIM REMOVAL/INSTALLATION - TAILGATE AREA ).
Disconnect the 2P connector (A) from the tailgate harness (B).

Fig 1: Identifying 2P Connector And Tailgate Harness
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Check for continuity between tailgate outer handle switch 2P connector terminals No. 1 and No. 2.
- There should be continuity when the tailgate outer handle is pulled.
- There should be no continuity when the tailgate outer handle is released.
Remove the tailgate handle (see TAILGATE HANDLE REPLACEMENT ).
Remove the six screws and the outer cover (A).

Fig 2: Identifying Outer Cover And Tailgate Outer Handle Switch With Mounting Bolts
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the two screws and the tailgate outer handle switch (B).