Drive Belt Replacement

Special Tools Required 

Belt Tension Release Tool Snap-on TK9317*, commercially available

*Available through the Honda Tool and Equipment Program 888-424-6857.

1. Remove the power steering fluid reservoir (A) from the clamp.
   Fig 1: Identifying Power Steering Fluid Reservoir

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
2. Move the auto-tensioner (A) using the belt tension release tool (TK9317) in the direction of the arrow to relieve tension from the drive belt, then remove the drive belt.
   Fig 2: Moving Auto-Tensioner Using Belt Tension Release Tool (TK9317)

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
3. Install the new drive belt in the reverse order of removal.