XM Receiver Removal/Installation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2014 Honda Ridgeline, 2013 Honda Ridgeline, 2012 Honda Ridgeline, 2011 Honda Ridgeline, and 2010 Honda Ridgeline. However, it is still accessible from the selected car via links, so may be relevant.

Remove the rear panel insulator (see REAR PANEL INSULATOR REPLACEMENT ).
Disconnect the antenna 2P connector (A) and 14P connector (B) from the XM receiver (C).

Fig 1: Identifying Antenna 2P Connector, 14P Connector And XM Receiver
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the three nuts, and remove the XM receiver.
Install the XM receiver the reverse order of removal.