Using the HDS

WARNING: This page is about a different car, the 2011 Honda Pilot, 2010 Honda Pilot, and 2009 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.

Connect the HDS to the data link connector.
Turn the ignition switch to ON (II), then enter the vehicle's VIN and mileage at the prompts.
Select BODY ELECTRICAL from the SYSTEM SELECT menu.
From the BODY ELECTRICAL SYSTEM SELECT menu, select POWER WINDOWS.
From the MODE menu, select ADJUSTMENT.
From the ADJUSTMENT menu, select WINDOW RESET for driver's side (passenger's side) window.
Follow the prompts on the screen.
Confirm that the power window control unit is reset by using the power window AUTO UP and AUTO DOWN function.