TPMS Calibration Procedure

The calibration begins when TPMS switch is pressed. The calibration is completed after driving at 31 to 62 mph (50 to 100 km/h), steadily without much acceleration or deceleration, for about 18 minutes. Full functionality of the system cannot be performed properly if the calibration is not completed.

1. Make sure the tires are inflated to the specified tire pressure listed on the doorjamb label.
2. Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode.
   NOTE: Vehicle must be stopped with the transmission in neutral (M/T) or P or N (A/T, CVT).
3. Press the TPMS switch (A) for 3 seconds. See Fig 1.
4. When the calibration successfully begins, the indicator (B) blinks twice.
   NOTE: If the indicator does not blink, check the TPMS switch.
5. See Calibration Completion Check. 

Fig 1: Identifying TPMS Button & Information Display Indicator

Courtesy of AMERICAN HONDA MOTOR CO., INC.