Idle Speed Inspection: Inspection
NOTE:
- Before checking the idle speed, check these items:
-
- -
The malfunction indicator lamp (MIL) has not been reported on, and there are no DTCs.
- -
Spark plugs
- -
Air cleaner
- -
PCV system
- -
- Apply the parking brake.
- HDS - Connect
- Idle Speed - Inspect
1. Start the engine. Hold the engine speed at 3, 000 rpm without load (CVT in P or N, M/T in neutral) until the radiator fan comes on, then let it idle. 2. Check the idle speed under no load conditions: headlights, blower fan, radiator fan, audio system, and air conditioner off.Idle speed should be:
3. Let the engine idle for 1 minute with high electric load (A/C on, temperature set to max cool, blower fan on high, headlights on high beam).Idle speed should be:
NOTE: If the idle speed is not within specification, do the PCM idle learn procedure . If the idle speed is still not within specification, go to the symptom troubleshooting .
Engine Model Idle Speed L15B7 720 +/- 50 rpm (CVT in P or N, M/T in neutral) K20C2 750 +/- 50 rpm (CVT in P or N, M/T in neutral) K20C1 780 +/- 50 rpm (in neutral) Engine Model Idle Speed L15B7 720 +/- 50 rpm (CVT in P or N, M/T in neutral) K20C2 750 +/- 50 rpm (CVT in P or N, M/T in neutral) K20C1 780 +/- 50 rpm (in neutral)