Tailgate Outer Handle Switch Test/Replacement: Test

Remove the tailgate lower trim panel (see TRIM REMOVAL/INSTALLATION - TAILGATE AREA ).
Disconnect the 2P connector (A) from the tailgate outer handle switch.

Fig 1: Identifying Tailgate Outer Handle Switch Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Check for continuity between the terminals in each switch position according to the figure below.

Fig 2: Tailgate Outer Handle Switch Connector Continuity Chart
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the continuity is not as specified, replace the tailgate outer handle switch.