Specifications Index
COMMON SPECS & PROCEDURES INDEX
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | |||
| Torque | |||
| Axle Nut/Hub Nut | |||
| 328 N.m (242 lbf.ft) | |||
| Battery | 12 VOLT BATTERY REMOVAL, INSTALLATION, AND TEST (WITH ABSORBED GLASS MAT BATTERY TYPE) , 12 VOLT BATTERY REMOVAL, INSTALLATION, AND TEST (WITHOUT ABSORBED GLASS MAT BATTERY TYPE) | ||
| Brakes | |||
| Bleeding Sequence | CONVENTIONAL BRAKE SYSTEM BLEEDING | ||
| Disc Brakes | |||
| Torque | |||
| Charging | |||
| Service Specifications | |||
| Torque | |||
| Drive Belts | |||
| Belt Routing & Adjustment |
DRIVE BELT REMOVAL, INSTALLATION, AND INSPECTION |
||
| Engine Cooling | |||
| General Service Specifications | |||
| Radiator Cap Pressure | 93-123 kPa (0.95-1.25 kgf/cm2, 13.5-17.8 psi) | ||
| Thermostat R & I | |||
| Water Pump R & I |
CRANKSHAFT PULLEY, TIMING BELT, AND WATER PUMP REMOVAL AND INSTALLATION |
||
| Engine Mechanical | |||
| Compression |
|
||
| Oil Pressure (176°F (80°C) |
|
||
| Overhaul |
See applicable specifications tables in ENGINE MECHANICAL - SERVICE SPECIFICATIONS |
||
| Torque | |||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. | ||
| Flywheel/Flex Plate Torque | 74 N.m (55 ft. lbs.) | ||
| Fuel System | |||
| Pressure Specification | 410 - 460 kPa (4.18 - 4.69 kgf/cm 2, 59.5 - 66.7 psi) | ||
| Fuel Pressure Test Procedure | |||
| Ignition | |||
| Firing Order & Cylinder Identification | FIRING ORDER & CYLINDER IDENTIFICATION | ||
| Spark Plug NGK: 7751 | |||
| Gap | 1.0-1.1 mm (0.039-0.043 in) | ||
| Torque | 22 N.m (16 ft. lbs.) | ||
| Starting | |||
| Starter | |||
| Torque | |||
| Wheel Alignment | |||
| Adjustment Specifications | |||
| Torque | |||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | 127 N.m (94 lbf.ft) | ||