DTC P065A

DTC P065A  : ACG No Charging Malfunction

NOTE:  Before you troubleshoot, review the general troubleshooting information - Refer to: How to Troubleshoot the Fuel and Emissions Systems, or How to Troubleshoot the A/T System .

DTC (PGM-FI)

1. DTC check

   - 1. Turn the vehicle to the ON mode.

   - 2. Clear the DTC with the HDS.

   - 3. Start the engine, and let it idle for 1 minute.

   - 4. Check for Pending or Confirmed DTCs with the HDS.

   DTC Description	Confirmed DTC	Pending DTC	Freeze Frame
   P0562 Charging System Low Voltage

   Is DTC P0562 indicated?

   YES 

   Go to the troubleshooting for DTC P0562 .

   NO 

   Go to step 2.

2. Problem verification

   - 1. Check for Pending or Confirmed DTCs with the HDS.

   DTC Description	Confirmed DTC	Pending DTC	Freeze Frame
   P065A ACG No Charging Malfunction

   Is DTC P065A indicated?

   YES 

   The failure is duplicated. Go to step 3.

   NO 

   Intermittent failure, the system is OK at this time. Check the alternator and the drive belt. If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the freeze data/on-board snapshot - Refer to: How to Troubleshoot the Fuel and Emissions Systems, or How to Troubleshoot the A/T System .

3. Drive belt check

   - 1. Inspect the drive belt.

   Is the drive belt OK?

   YES 

   Repair or replace the alternator .

   NO 

   Replace the drive belt .