VSA Sensor Neutral Position Memorization: Procedure

NOTE: 

• The VSA sensor neutral position must be learned whenever you do any of these actions:
  1. -

     Updating or replacing the VSA modulator-control unit.

  2. -

     Updating or replacing the SRS unit.

  3. -

     Removing the steering wheel.

  4. -

     Removing the steering angle sensor.

  5. -

     Disconnecting the steering joint.

  6. -

     Wheel alignment adjustment.

• Before doing the memorization procedure, park the vehicle on a flat and level surface.

1. HDS - Connect
2. VSA Sensor Neutral Position - Memorize

   NOTE:  Do not press the brake pedal during this procedure. 1. Set the steering wheel in the straight ahead position. 2. Select the ADJUSTMENT from the ABS/TCS/VSA menu with the HDS, then select ALL SENSOR, and follow the screen prompts.