Specifications Index

COMMON SPECS & PROCEDURES INDEX

System		Specification/Procedure
Air Conditioning
Service		AIR CONDITIONING
Torque		HEATING, VENTILATION, AND AIR CONDITIONING
Axle Nut/Hub Nut
Front 328 N.m (242 ft. lbs.) Rear 328 N.m (242 ft. lbs.)
Battery		12 VOLT BATTERY TEST
Brakes
Bleeding Sequence		CONVENTIONAL BRAKE SYSTEM BLEEDING
Disc Brakes		BRAKES
Torque		FRONT BRAKE AREA or REAR BRAKE AREA
Charging
Service Specifications		ENGINE ELECTRICAL
Torque		CHARGING SYSTEM - SYMPTOM TROUBLESHOOTING
Drive Belts
Belt Routing & Adjustment		DRIVE BELT INSPECTION
Engine Cooling
General Service Specifications		COOLING SYSTEM
Radiator Cap Pressure		93-123 kPa (0.95-1.25 kgf/cm2, 13.5-17.8 psi)
Thermostat R & I		THERMOSTAT TEST
Water Pump R & I		WATER PUMP AREA - SERVICE INFORMATION
Engine Mechanical
Compression		930 kPa (9.48 kgf/cm² , 134.8 psi) Minimum 200 kPa (2.04 kgf/cm² , 29.0 psi) Maximum variation
Oil Pressure (176°F (80°C)		100 kPa (1.02 kgf/cm² , 14.5 psi) min. @ idle 450 kPa (4.59 kgf/cm² , 65.3 psi) min. @ 3000 RPM
Overhaul		See applicable specifications tables in ENGINE ASSEMBLY
Torque		ENGINE MECHANICAL / ENGINE CONTROL SYSTEM - SERVICE, TESTING AND TROUBLESHOOTING
Fluid Specifications		See FLUIDS under MAINTENANCE tab.
Flywheel/Flex Plate Torque		74 N.m (55 ft. lbs.)
Fuel System
Pressure Specification		410 - 460 kPa (4.18 - 4.69 kgf/cm 2, 59.5 - 66.7 psi)
Fuel Pressure Test Procedure		FUEL PRESSURE TEST
Ignition
Firing Order & Cylinder Identification		FIRING ORDER & CYLINDER IDENTIFICATION
Spark Plug NGK: 7751
Gap		1.0-1.1 mm (0.039-0.043 in)
Torque		22 N.m (16 ft. lbs.)
Starting
Starter		ENGINE ELECTRICAL
Torque		STARTER AREA
Wheel Alignment
Adjustment Specifications		SUSPENSION (EXCEPT TRAILSPORT) or SUSPENSION (TRAILSPORT)
	Torque	WHEEL ALIGNMENT
Wheel & Tire
Wheel Lug Nut Torque		127 N.m (94 ft. lbs.)