Confirmation Procedure
Operating Condition
- Enter the maintenance mode, then start the engine. Hold the engine speed [Engine Speed] at 3, 000 rpm without load (in P or N) until the radiator fan comes on, then let it idle for at least 2 minutes. After warming up the engine, cancel the maintenance mode.
- Drive the vehicle at a steady speed between 55 - 75 mph (88 - 120 km/h) for at least 1 minute.
- Decelerate with the throttle valve fully closed for at least 10 seconds.
- Drive the vehicle in this manner only if the traffic regulations and ambient conditions allow.