DTC Troubleshooting: U1280 (Relay Control Module): Notes

DTC U1280  : B-CAN communication bus line error (BUS-OFF)

How to use this manual .

NOTICE:  

• Before you troubleshoot, review the How to Troubleshoot .
• Troubleshoot the following DTCs first, if stored at the same time.
  • Network Communications [CAN Gateway]: DTC U1280-00

NOTE:  If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A - Refer to: Body Electrical Troubleshooting - B-CAN System Diagnosis Test Mode A - Initial Communication and DTC Checks () or Body Electrical Troubleshooting - B-CAN System Diagnosis Test Mode B - Control Unit Not Communicating () or Body Electrical Troubleshooting - B-CAN System Diagnosis Test Mode 1 and Test Mode 2 (without the HDS) () .