Installation Procedure

Fig 1: I/P Center Console

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: Make sure HVAC duct is aligned with center console.

Align center console to center console bracket and route the electrical wiring through console.
Connect the console electrical connector.

Fig 2: Center Console Bolts

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the center console to center console bracket.
Install the center console bolts.
Tighten: Tighten the bolts to 9 N.m (80 lb in).

Fig 3: Console Upper Trim Panel

Courtesy of GENERAL MOTORS CORP.

Install the top panel to center console. Refer to Trim Plate Replacement - Console Upper