Radiator Removal Note

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.

Remove the condenser from the radiator with the pipes still connected, by pressing the radiator side tab to unlock tab b on the condenser.

Fig 1: Removing Condenser
Courtesy of MAZDA MOTORS CORP.
Remove rubber mount A from the mount installation hole.

Fig 2: Removing Rubber Mounts
Courtesy of MAZDA MOTORS CORP.
Tilt the radiator to the engine side.
Remove rubber mount B from the mount installation hole.
Remove the radiator from below.