LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 271 (Fuel System) >> Fuel Injector Removal/Installation >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Injector Removal/Installation: Notes

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Follow "BEFORE SERVICE PRECAUTION" before performing any work operations to prevent fuel from spilling from the fuel system. (See BEFORE SERVICE PRECAUTION .)
  2. Remove the plug hole plate.
  3. Remove the battery cover.
  4. Disconnect the negative battery cable.
  5. Disconnect the fuel injector connector.
  6. Remove in the order indicated in the table.
    Fig 1: Fuel Injectors With Torque Specifications
    G00973875Courtesy of MAZDA MOTORS CORP.
    Fig 2: Removal Order Of Fuel Injectors
    G00973874Courtesy of MAZDA MOTORS CORP.
  7. Install in the reverse order of removal.
  8. Inspect all related parts by performing "AFTER SERVICE PRECAUTION". (See AFTER SERVICE PRECAUTION .)
scientia non olet · About LEMON Manuals