LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 293 (Washer System & Wiper System) >> Washer Fluid-Level Sensor Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Washer Fluid-Level Sensor Removal/Installation

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the washer tank. (See WASHER TANK REMOVAL/INSTALLATION )
  3. Disconnect the connector.
  4. Remove the washer fluid-level sensor.
  5. Remove the grommet.
  6. Install in the reverse order of removal.
    Fig 1: Removing/Installing Washer Fluid-Level Sensor
    G00974312Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals