Installation Procedure
WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
- Place the mirror into position on door.
- Install the fasteners (1) retaining the mirror to the door.
Tighten: Tighten the fasteners to 25 N.m (18 lb ft).
- Connect the mirror electrical connector.
- Install the water deflector. Refer to Water Deflector Replacement - Front Door .
- Install the door trim panel. Refer to Trim Panel Replacement - Side Front Door .
NOTE:
Refer to Fastener Notice
in Cautions and Notices.