LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 586 (HVAC Systems - Automatic) >> Repair Instructions >> Blower Motor Control Processor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Blower Motor Control Processor & HVAC Module Assembly
    GM826796Courtesy of GENERAL MOTORS CORP.
  1. Remove the I/P insulator panel. Refer to Insulator Replacement - Instrument Panel (I/P) .
  2. Disconnect the electrical connector (2) from the blower motor (1).
  3. Disconnect the electrical connector (4) from the blower motor control processor (3).
  4. Remove the screws from the blower motor control processor (3).
  5. Remove the blower motor control processor (3) from the HVAC module assembly.
scientia non olet · About LEMON Manuals