Removal Procedure
WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the center I/P trim bezel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Center in Instrument Panel, Gauges and Console.
- Remove the screws from the HVAC control module (2).
- Depress the HVAC control module tabs (3) and remove the HVAC control module (2) from the I/P (4).
- Reposition the HVAC control module (2) from the I/P panel (1).
- Disconnect the electrical connectors from the HVAC control module (2).