LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 597 (Stationary Window System) >> Repair Instructions >> Windshield Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the windshield into the opening. Refer to Urethane Adhesive Installation of Stationary Windows .
  2. Install the cowl air inlet grille panel. Refer to Air Inlet Grille Panel Replacement - Non Functional in Exterior Trim.
  3. Fig 1: Identifying Windshield
    GM870637Courtesy of GENERAL MOTORS CORP.
  4. Install the window side reveal moldings to the vehicle. Refer to Windshield Side Reveal Molding Replacement .
  5. Install the window wiper arms. Refer to Wiper Arm Replacement in Wipers/Washer Systems.
  6. Install the rear view mirror. Refer to Rearview Mirror Replacement .
  7. Close the hood.
  8. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.