LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 614 (Disc Brake System) >> Repair Instructions >> Disc Brake Splash Shield Replacement - Front >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Front Disc Brake Splash Shield Components
    GM371077Courtesy of GENERAL MOTORS CORP.
  1. Install the splash shield.
  2. Install the hub and bearing assembly. Refer to Wheel Hub, Bearing, and Seal Replacement in Front Suspension.
  3. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  4. Remove the safety stands.
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals