Installation Procedure
WARNING: This page is about a different car, the 2003 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
- Install the body control module (1) into the bracket.
- Install the I/P carrier. Refer to Instrument Panel (I/P) Carrier Replacement in Instrument Panel, Gages and Console.
- Connect the battery negative cables. Refer to Battery Negative Cable Disconnect/Connect Procedure (Single Battery) in Engine Electrical.
- Setup the body control modules customized options. Refer to Body Control Module (BCM) Programming/RPO Configuration .