LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2004 >> H2 4D Utility Pickup >> Repair and Diagnosis >> External Pages >> Different car >> Section 712 (Sir) >> Repair Instructions >> Inflatable Restraint Instrument Panel Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2003 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Inflatable Restraint I/P Module
    GM832804Courtesy of GENERAL MOTORS CORP.
  1. Install the inflatable restraint I/P module (1) to the mounting bracket through the front of the instrument panel.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the fasteners (2) to the inflatable restraint I/P module.

    Tighten:  Tighten the fasteners to 10 N.m (89 lb in).

  3. Enable the SIR system. Refer to SIR Disabling and Enabling Zones .
  4. Install the yellow connector to the I/P.
  5. Install the trim panel to the substraight. Refer to Trim Plate Replacement - Instrument Panel (I/P) Accessory Right in Instrument Panel, Gages and Console.
scientia non olet · About LEMON Manuals