Front Fender Liner: Service and Repair

Wheelhouse Panel Replacement

Removal Procedure

1. Remove the wheel. Refer to Tire and Wheel Removal and Installation Service and Repair .
2. Remove the right side air temperature sensors.




3. Remove push-in retainers (1).
4. Remove the wheelhouse panel.
5. Remove the 2 bolts and 3 screws.



Installation Procedure





1. Align the wheelhouse panel to the wheelhouse.
2. Install the right side air temperature sensors.

Notice: Refer to Fastener Notice Service Precautions .

3. Tighten the 2 bolts and 3 screws.

Tighten the 2 bolts and 3 screws to 2 Nm (18 lb in).

4. Install push-in retainers (1).
5. Install the wheel. Refer to Tire and Wheel Removal and Installation Service and Repair .