April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .
Remove the battery cable harness clips (1, 2) from the battery tray.

Fig 1: Harness Clips

GM1560042

Courtesy of GENERAL MOTORS CORP.

Fig 2: Nuts Securing The Battery Cables To Underhood Fuse Block

GM1560045

Courtesy of GENERAL MOTORS CORP.

Press the locking tabs inward in order to remove the underhood fuse block cover from the underhood fuse block.
Remove the nut (1) securing the generator positive cable inner terminal to the underhood fuse block.

Fig 3: Starter Wiring

GM1560044

Courtesy of GENERAL MOTORS CORP.

Reposition the protective boot from the generator output BAT terminal for access.
Remove the generator output BAT terminal nut (2) and disconnect the generator positive lead (1) from the generator.
Remove the positive cable clip (3) from the engine wiring harness bracket.
Remove the generator positive cable from the battery cables harness conduit.