Inspection/Maintenance (I/M) System DTC Table

System	DTCs Required to Set System Status to YES
Catalyst Monitor If an I/M System Status indicator did NOT update to YES during the Inspection/Maintenance (I/M) Complete System Set Procedure , review each indicator and reference this table to determine each DTC associated with the I/M System Status Indicator. Each DTC listed below has specific conditions that must be met for the diagnostic to run. Included in these conditions are additional DTCs which, if set, will inhibit these DTCs from running. Reviewing and operating the vehicle within the Conditions for Running for each DTC listed below will allow the I/M System Status Indicators to transition to YES.
Catalyst	DTC P0420
EVAP	DTC P0442 DTC P0446 DTC P0455 DTC P0496
Oxygen Sensor	DTC P0130, P0131, P0132, P0133, P0134, P0136, P0137, P0138, P0140, P1133, or P1134
Oxygen Sensor Heater	DTC P0030, P0036, P0135, or P0141