LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2007 >> H2 4D Utility Pickup >> Repair and Diagnosis >> Body & Frame >> Frames, Subframes & Crossmembers >> Frame And Underbody >> Repair Instructions >> Rocker Panel Protector Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    IMPORTANT: Do not tighten the fasteners until they have all been started.
    Fig 1: Rocker Panel Protector
    GM797217Courtesy of GENERAL MOTORS CORP.
  1. Install the rocker panel protector to the vehicle.
    2. NOTE: Refer to Fastener Notice .
  2. Loosely install all of the mounting bolts.

    Tighten:  Tighten the bolts to 50 N.m (37 lb ft).

  3. Install the EVAP canister vent valve bracket. Refer to Evaporative Emission Canister Vent Solenoid Valve Replacement .
  4. Install the assist step if equipped. Refer to Assist Step Replacement (Removable U Step)  or Assist Step Replacement (Tubular BVE)  or Assist Step Replacement (w/WS2, BVX) .
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals