LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2007 >> H2 4D Utility Pickup >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Engine Ground Strap Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of Ground Strap Nut At Front Of Dash Stud
    GM663474Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  1. Install the ground strap to the stud.
  2. Install the ground strap nut to the stud at the front of dash.

    Tighten:  Tighten the nut to 9 N.m (80 lb in).

  3. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
    4. Fig 2: View Of Ground Cable Bolt At Engine Block
    GM663475Courtesy of GENERAL MOTORS CORP.
  4. Position the ground strap and engine wiring harness ground.
  5. Install the engine wiring harness ground bolt.

    Tighten:  Tighten the bolt to 16 N.m (12 lb ft).

  6. Install the left hand catalytic convert. Refer to Catalytic Converter Replacement (4.8L and 5.3L Engines) .
  7. Lower the vehicle.
scientia non olet · About LEMON Manuals