LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2007 >> H2 4D Utility Pickup >> Repair and Diagnosis >> External Pages >> Different car >> Section 1848 (Wiring Systems And Power Management - Component Connector End Views - P-R) >> Component Connector End Views - P Through R >> Rear Object Sensor Control Module X1 (UD7)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Rear Object Sensor Control Module X1 (UD7)

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Rear Object Sensor Control Module X1 (UD7)
GM1715212Courtesy of GENERAL MOTORS CORP.
Rear Object Sensor Control Module X1 (UD7)

Pin Wire Circuit Function
1 0.5 PU 2378 RR Corner Object Sensor Signal
2 0.5 D-GN 2377 RR Middle Object Sensor Signal
3 0.5 OG 2376 LR Middle Object Sensor Signal
4 0.5 D-BU 2374 Object Sensor Supply Voltage
5 0.5 YE 2375 LR Corner Object Sensor Signal
6-7 - - Not Used
8 0.5 GY 2379 Low Reference
Connector Part Information 
  • Harness: Body
  • OEM: 13551679
  • Service: 19115653
  • Description: 8-Way F Kaizen 0.64 Series (GY)
Terminal Part Information 
  • Terminal/Tray: 7116-4618-02/14
  • Core/Insulation Crimp: P/P
  • Release Tool/Test Probe: J-38125-215/J-35616-64B (L-BU)
scientia non olet · About LEMON Manuals