Installation Procedure
- Install the window regulator to the midgate.
- Connect the window regulator electrical connector (1).
- Install the nuts retaining the window regulator to the midgate.
Tighten: Tighten the window regulator nuts to 25 N.m (18 lb ft).
- Install the midgate window. Refer to Midgate Window Replacement .
- Inspect and adjust the midgate window alignment to the weatherstrip channel. Refer to Midgate Window Replacement .
- Install the midgate inner panel. Refer to Midgate Inner Panel Replacement .
NOTE:
Refer to Fastener Notice
.