Installation Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Level Sensor

Courtesy of GENERAL MOTORS CORP.

Get the level sensor in a horizontal position as shown (1).

Fig 2: Washer Solvent Level Sensor Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Install the level sensor (6) in the washer solvent container (5). Ensure to reference the locating mark made during removal.
Connect the washer solvent electrical connector.
Install the A/C low pressure switch. Refer to Air Conditioning (A/C) Low Pressure Switch Replacement .
Refill the washer solvent container.
Inspect for leaks.
Close the hood.