LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2008 >> H2 4D Utility Pickup >> Repair and Diagnosis >> Steering >> Steering Linkage >> Repair Instructions >> Pitman Arm Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Install the pitman arm onto the steering gear.
    2. Fig 1: Pitman Arm Nut And Washer
    GM1862648Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENERS .
  2. Install a new pitman arm washer (2) and nut (1).

    Tighten:  Tighten the nut to 250 N.m (184 lb ft).

  3. Remove the steering gear from the vise.
  4. Install the steering gear. Refer to Steering Gear Replacement .
  5. Adjust the front toe. Refer to Front Toe Adjustment .
scientia non olet · About LEMON Manuals