LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2008 >> H3 Alpha >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Generator Bracket Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of Generator Bracket & Bolts
    GM847280Courtesy of GENERAL MOTORS CORP.
  1. Position the generator bracket in the vehicle.
    2. NOTE: Refer to Fastener Notice .
  2. Install the generator bracket bolts.

    Tighten:  Tighten the bolts to 50 N.m (37 lb ft).

    3. Fig 2: Generator Bracket Replacement
    GM1897775Courtesy of GENERAL MOTORS CORP.
  3. Position the engine wiring harness bracket to the generator bracket.
  4. Install the engine wiring harness bracket bolt (4).

    Tighten:  Tighten the bolt to 40 N.m (29.5 lb ft).

  5. Install the drive belt idler pulley. Refer to Drive Belt Idler Pulley Replacement .
  6. Install the generator. Refer to Generator Replacement (LH8)  or Generator Replacement (LLR) .
scientia non olet · About LEMON Manuals