Set Up a Theft Deterrent Module (TDM) Using New Keys: Notes
WARNING: This page is about a different car, the 2008 Chevrolet Malibu Classic. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Use this procedure only if replacing the TDM using new vehicle keys.
The TDM must be replaced prior to beginning this procedure.
The TDM must be replaced prior to beginning this procedure.
- Connect a scan tool to the vehicle.
- With a new, unlearned, vehicle key, turn ON the ignition, with the engine OFF.
- With a scan tool, select TDM in the Vehicle Control Systems Module Replacement/Setup data list.
- Select Step 1.
- Select Use New Keys.
- Follow the scan tool on-screen instructions.