Removal Procedure

WARNING: This page is about a different car, the 2008 Chevrolet Malibu Classic. However, it is still accessible from the selected car via links, so may be relevant.

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
Remove the front wheel. Refer to Tire and Wheel Removal and Installation .

Fig 1: View Of Stabilizer Link At Strut Assembly

Courtesy of GENERAL MOTORS CORP.

Disconnect the stabilizer link from the strut.

Fig 2: Identifying Strut To Steering Knuckle Nuts

Courtesy of GENERAL MOTORS CORP.

Remove the strut to steering knuckle nuts.
If applicable, reposition the wheel speed sensor/ABS harness and bracket.
Remove the strut to steering knuckle bolts.

Fig 3: Identifying Upper Strut Cap To Body Nuts

Courtesy of GENERAL MOTORS CORP.

Remove the upper strut cap to body nuts.

IMPORTANT: In order to prevent damage to the CV joint boot, place a shop towel over the CV joint.

Remove the strut from the vehicle.
For strut replacement, refer to Strut, Strut Component, and Spring Replacement .