Circuit/System Testing
WARNING: This page is about a different car, the 2008 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the harness connector at the distance sensing cruise control (DSCC) module.
- Ignition OFF, test for less than 1.0 ohm of resistance between the ground circuit terminal 6 and ground.
- If greater than the specified range, test the ground circuit for an open/high resistance.
- Ignition ON, test for greater than 9.2 volts between the ignition 1 voltage circuit terminal 1 and ground.
- If less than the specified value, test the circuit for an open/high resistance.
- If all circuits test normal, test or replace the DSCC module.