Circuit/System Verification
- Verify there are no debris on the lens and that the a bezel and bezel seal are not damaged.
- If debris are found on the lens, clean any debris from the lens. If the lens, bezel, or bezel seal are damaged, replace as necessary.
- Ignition ON, vehicle in PARK, verify the backup lamps are OFF.
- If the backup lamps are illuminated, refer to Backup Lamps Malfunction .
- Vehicle in REVERSE, verify the backup lamps are illuminated.
- If the backup lamps are not illuminated, refer to Backup Lamps Malfunction .
- Vehicle in PARK, verify that the LCD is not deployed from the ISRVM.
- If the LCD is deployed, refer to Circuit/System Testing .
- Vehicle in REVERSE, the LCD should deploy from the ISRVM and a clear rearview image should be displayed.
- If a clear image is not displayed, refer to Circuit/System Testing .
- If the LCD does not deploy, refer to Circuit/System Testing .